KYOCERA KM-C2230 Manuale Utente

Enlarge Display Mode User’s GuidePlease read the User’s Guide before using the copier.Keep it close to the copier for easy reference.KM-C2230

1.1 Explanation of Guide Conventions11-3Before Making Copies Chapter 1[ ] This indicates a key either on the touch panel or on the control panel.

5.3 Specifying a Zoom Setting55-21Specifying Copy Settings Chapter 5To specify different vertical and horizon-tal scaling proportions (X/Y Zoom set-ti

55.3 Specifying a Zoom Setting5-22Specifying Copy Settings Chapter 54Using the keypad, type in the desired length of side X (between 0.250 and 4.000).

5.4 Selecting a Paper Setting55-23Specifying Copy Settings Chapter 55.4 Selecting a Paper Setting}ReferenceFor details, refer to “Selecting a Paper/Si

55.4 Selecting a Paper Setting5-24Specifying Copy Settings Chapter 5To select the Paper setting1Touch [Basic], then [Paper/Size].

5.4 Selecting a Paper Setting55-25Specifying Copy Settings Chapter 52Select the paper drawer specified with pa-per of the desired size. The selected P

55.5 Selecting Original Setting5-26Specifying Copy Settings Chapter 55.5 Selecting Original Setting}ReferenceFor details, refer to “Selecting Original

5.5 Selecting Original Setting55-27Specifying Copy Settings Chapter 5To select an Original setting1Touch [Orig Ö Copy], and then touch [Origi-nal].2To

55.5 Selecting Original Setting5-28Specifying Copy Settings Chapter 53Touch the key for the appropriate document orientation, and then touch [Enter].❍

5.5 Selecting Original Setting55-29Specifying Copy Settings Chapter 56Touch [Enter].The selected Original settings are applied.

55.6 Selecting Copy Settings5-30Specifying Copy Settings Chapter 55.6 Selecting Copy Settings}ReferenceFor details, refer to “Selecting Copy Settings”

11.2 Control Panel Parts and Their Functions1-4Before Making Copies Chapter 11.2 Control Panel Parts and Their Functions}ReferenceFor details, refer t

5.6 Selecting Copy Settings55-31Specifying Copy Settings Chapter 5To select a Copy setting1Touch [Orig Ö Copy], and then touch [Copy].2Select the desi

55.6 Selecting Copy Settings5-32Specifying Copy Settings Chapter 5✎Additional InformationTo specify the position of the binding margin, touch [Binding

5.7 Selecting a Photo/Density Setting55-33Specifying Copy Settings Chapter 55.7 Selecting a Photo/Density Set-ting}ReferenceFor details, refer to “Sel

55.7 Selecting a Photo/Density Setting5-34Specifying Copy Settings Chapter 5To select an Original Image Type setting1Touch [Photo/Density], and then t

5.7 Selecting a Photo/Density Setting55-35Specifying Copy Settings Chapter 5✎Additional InformationIf [Text & Photo], [Printed Image], [Photo Pa-p

55.7 Selecting a Photo/Density Setting5-36Specifying Copy Settings Chapter 53Touch [Enter].The selected Original Image Type setting is applied.

5.7 Selecting a Photo/Density Setting55-37Specifying Copy Settings Chapter 5To select the Background, Density, Text Enhancement and “Glossy Mode” set-

55.7 Selecting a Photo/Density Setting5-38Specifying Copy Settings Chapter 5❍ To automatically set the density of the background color, touch [Backgro

5.7 Selecting a Photo/Density Setting55-39Specifying Copy Settings Chapter 5❍ For documents consisting of text that overlaps images such as illustrati

55.8 Checking the Settings5-40Specifying Copy Settings Chapter 55.8 Checking the SettingsPress the [Mode Check] key in the control panel to display th

1.2 Control Panel Parts and Their Functions11-5Before Making Copies Chapter 13 [Access] key If Volume Track mode has been set, press this key after en

5.8 Checking the Settings55-41Specifying Copy Settings Chapter 52Touch [Next].The second screen showing the current set-tings appears.3Touch [Next].Th

55.8 Checking the Settings5-42Specifying Copy Settings Chapter 54Touch [Next].The fourth screen showing the current set-tings appears.5Touch [Next].Th

5.8 Checking the Settings55-43Specifying Copy Settings Chapter 5✎Additional InformationIf the [Text] was selected on the Original Image Type screen, t

55.8 Checking the Settings5-44Specifying Copy Settings Chapter 5To change the settings1Press the [Mode Check] key in the control panel.2Touch [Next] o

Accessibility Mode Operations Chapter 666AccessibilityModeOperationsThis chapter provides information on the Accessibility mode functions.

66.1 Setting the “Key Repeat Start/Interval” Function6-2Accessibility Mode Operations Chapter 66.1 Setting the “Key Repeat Start/In-terval” FunctionIf

6.1 Setting the “Key Repeat Start/Interval” Function66-3Accessibility Mode Operations Chapter 6To specify the key repeat start time and key repeat int

66.1 Setting the “Key Repeat Start/Interval” Function6-4Accessibility Mode Operations Chapter 63Touch and to specify the desired Time to Start setting

6.2 Setting the “Enlarge-Display Notice” Function66-5Accessibility Mode Operations Chapter 66.2 Setting the “Enlarge-Display No-tice” FunctionWhen the

66.2 Setting the “Enlarge-Display Notice” Function6-6Accessibility Mode Operations Chapter 6To specify whether the confirmation mes-sage for canceling

11.2 Control Panel Parts and Their Functions1-6Before Making Copies Chapter 112111091 23487 6 5No. Part Name Description8 [Start] key Press to start c

6.2 Setting the “Enlarge-Display Notice” Function66-7Accessibility Mode Operations Chapter 63Select whether the confirmation message for canceling the

66.2 Setting the “Enlarge-Display Notice” Function6-8Accessibility Mode Operations Chapter 6Operations for the confirmation message for canceling the

6.2 Setting the “Enlarge-Display Notice” Function66-9Accessibility Mode Operations Chapter 6Outline of the Confirmation to Cancel the Enlarge Display

66.2 Setting the “Enlarge-Display Notice” Function6-10Accessibility Mode Operations Chapter 6

Managing Jobs Chapter 777ManagingJobsThis chapter provides information on managing jobs.

77.1 Overview of Jobs7-2Managing Jobs Chapter 77.1 Overview of Jobs}ReferenceFor details, refer to “Overview of Jobs” on page 8-2 of the User’s Guide.

7.2 Displaying the Job List Screen77-3Managing Jobs Chapter 77.2 Displaying the Job List Screen1Load the document to be copied, and then press the [St

77.3 Deleting a Job7-4Managing Jobs Chapter 77.3 Deleting a JobFor details, refer to “Overview of Jobs” on page 8-2 of the User’s Guide.To delete a qu

7.3 Deleting a Job77-5Managing Jobs Chapter 72Select the job that you wish to delete, and then touch [Delete].The queued job is deleted.

77.3 Deleting a Job7-6Managing Jobs Chapter 7To delete a job that is being printed1While the job is being printed, press the [Stop] key in the control

1.2 Control Panel Parts and Their Functions11-7Before Making Copies Chapter 112 [Mode Check] keyPress to display screens showing the specified setting

7.3 Deleting a Job77-7Managing Jobs Chapter 73Select the job that you wish to delete, and then touch [Delete].The message “Job has been done improp-er

77.4 Job List Screens7-8Managing Jobs Chapter 77.4 Job List Screens}ReferenceFor details, refer to “Job Log Screens” on page 8-4 of the User’s Guide.I

7.4 Job List Screens77-9Managing Jobs Chapter 7Active Scans screenTouch [Active Scans] in the Job List screen to dis-play a list of jobs being scanned

77.4 Job List Screens7-10Managing Jobs Chapter 7Stocked List screenTouch [Stocked List] in the Job List screen to dis-play a list of jobs stored in th

7.4 Job List Screens77-11Managing Jobs Chapter 7✎Additional InformationStored jobs cannot be deleted (printed) from the Stocked List screen in Enlarge

77.4 Job List Screens7-12Managing Jobs Chapter 7Locked List screenTouch [Locked List] in the Job List screen to display a list of jobs that are locked

7.4 Job List Screens77-13Managing Jobs Chapter 7✎Additional InformationLocked jobs cannot be deleted (printed) from the Locked List screen in Enlarge

77.4 Job List Screens7-14Managing Jobs Chapter 7Print Log screenTouch [Print Log] in the Job List screen to display a list of jobs that have been prin

7.4 Job List Screens77-15Managing Jobs Chapter 7Scan Log screenTouch [Scan Log] in the Job List screen to display a list of jobs that have been scanne

77.4 Job List Screens7-16Managing Jobs Chapter 7

11.3 Adjusting the Angle of the Control Panel1-8Before Making Copies Chapter 11.3 Adjusting the Angle of the Con-trol Panel}ReferenceFor details, refe

© 2004 http://www.kyoceramita.com @@@@ is a trademark of Kyocera Corporation 2004. 54036-7797-01

1.3 Adjusting the Angle of the Control Panel11-9Before Making Copies Chapter 1To lower the angle of the control panel➜ Pull the control panel release

11.4 Touch Panel1-10Before Making Copies Chapter 11.4 Touch PanelDisplaying the enlarged Basic screen}ReferenceFor details, refer to “Touch Panel” on

1.4 Touch Panel11-11Before Making Copies Chapter 1The enlarged Basic screen appears in the touch panel.✎Additional InformationPress the [Enlarge Displ

11.4 Touch Panel1-12Before Making Copies Chapter 1Touch panel operationTo activate a function or to select a setting, lightly touch the desired functi

IntroductioniIntroductionThis User’s Guide contains details on the operation of the various functions available in the Enlarge Dis-play mode and on th

1.4 Touch Panel11-13Before Making Copies Chapter 1Keys displayed in the touch panelTouch this key to display the Basic screen.This key appears when th

11.4 Touch Panel1-14Before Making Copies Chapter 1This key appears if an error occurs dur-ing image stabilizing, or during print or scan operations.To

1.4 Touch Panel11-15Before Making Copies Chapter 1Paper type iconsIf paper other than plain paper is specified for the 1st drawer and the multiple byp

11.4 Touch Panel1-16Before Making Copies Chapter 1Paper type icons that appearOverhead projector transparenciesEnvelopes Thick paper 1Thick paper 2 Th

1.4 Touch Panel11-17Before Making Copies Chapter 1Paper supply iconsThe amount of paper that remains is indicated in the screen where the paper size i

11.4 Touch Panel1-18Before Making Copies Chapter 1To use the Volume Track modeIf the “Volume Track Mode” function is set to “Yes”, this machine can on

1.4 Touch Panel11-19Before Making Copies Chapter 13Using the keypad, type in the access num-ber.4Press the [Access] key in the control panel.The Basic

11.4 Touch Panel1-20Before Making Copies Chapter 1

Paper Settings Chapter 222PaperSettingsThis chapter provides procedures for specifying the paper settings.

22.1 Paper Settings2-2Paper Settings Chapter 22.1 Paper Settings}ReferenceFor details, refer to “Selecting a Paper/Size Set-ting” on page 3-18 of the

ContentsiiContentsThe topics listed below are described in the Enlarge Display Mode Operations Guide. For details on oth-er topics, refer to the User’

2.1 Paper Settings22-3Paper Settings Chapter 23Touch [Custom Size].❍ To specify a paper size in inch measure-ments, continue with step 4.❍ To specify

22.1 Paper Settings2-4Paper Settings Chapter 25Touch , , and to select the length of side Y for the paper that is loaded (between 3-9/16 and 12-1/4 i

2.1 Paper Settings22-5Paper Settings Chapter 26Using the keypad, type in the length of side X for the paper that is loaded (between 140 and 457 mm). (

22.1 Paper Settings2-6Paper Settings Chapter 2✎Additional InformationIf custom paper sizes have been stored, in-stead of performing steps 6 and 7, a s

2.1 Paper Settings22-7Paper Settings Chapter 2To store a non-standard (custom) paper size for the 1st drawer1Touch [Paper/Size] in the Basic screen.2T

22.1 Paper Settings2-8Paper Settings Chapter 24Touch and to select the length of side X for the paper that is loaded (between 5-1/2 and 18 inches). (A

2.1 Paper Settings22-9Paper Settings Chapter 26Using the keypad, type in the length of side X for the paper that is loaded (between 140 and 457 mm). (

22.1 Paper Settings2-10Paper Settings Chapter 29Touch [Enter].A non-standard (custom) paper size is stored for the 1st drawer.

2.1 Paper Settings22-11Paper Settings Chapter 2To specify a paper size setting for the 1st drawerThe size of the paper loaded into the 1st drawer is a

22.1 Paper Settings2-12Paper Settings Chapter 23Touch either [Inch] or [Metric], depending on the size of paper that is loaded.4Select the setting for

ContentsiiiPaper type icons...1-15Paper supply icons ...1-17To use the Volume Track mode ...

2.1 Paper Settings22-13Paper Settings Chapter 2To specify a non-standard (custom) paper size for the multiple bypass trayIf non-standard-sized paper i

22.1 Paper Settings2-14Paper Settings Chapter 23Touch [Custom Size].❍ To specify a paper size in inch measure-ments, continue with step 4.❍ To specify

2.1 Paper Settings22-15Paper Settings Chapter 25Touch , , and to select the length of side Y for the paper that is to be loaded (between 3-9/16 and 12

22.1 Paper Settings2-16Paper Settings Chapter 26Using the keypad, type in the length of side X for the paper that is to be loaded (between 140 and 457

2.1 Paper Settings22-17Paper Settings Chapter 2✎Additional InformationIf custom paper sizes have been stored, in-stead of performing steps 6 and 7, a

22.1 Paper Settings2-18Paper Settings Chapter 2To store a non-standard (custom) paper size for the multiple bypass trayTwo non-standard paper sizes ca

2.1 Paper Settings22-19Paper Settings Chapter 24Touch and to select the length of side X for the paper that is loaded (between 5-1/2 and 18 inches). (

22.1 Paper Settings2-20Paper Settings Chapter 26Using the keypad, type in the length of side X for the paper that is to be loaded (between 140 and 457

2.1 Paper Settings22-21Paper Settings Chapter 29Touch [Enter].A non-standard (custom) paper size is stored for the multiple bypass tray.

22.1 Paper Settings2-22Paper Settings Chapter 2To specify a paper size setting for the multiple bypass trayThe size of the paper loaded into the multi

Contentsiv4 Useful Operations4.1 Basic Copying ... 4-2To make copies ... 4-24.2 Stoppi

2.1 Paper Settings22-23Paper Settings Chapter 23Touch either [Inch] or [Metric], depending on the size of paper that is to be loaded.4Select the setti

22.1 Paper Settings2-24Paper Settings Chapter 2To specify the paper type for the multiple bypass traySelect the appropriate setting for the type of th

2.1 Paper Settings22-25Paper Settings Chapter 24Touch the key for the type of paper loaded into the multiple bypass tray, and then touch [Enter].The p

22.1 Paper Settings2-26Paper Settings Chapter 2

Original Documents Chapter 333OriginalDocumentsThis chapter provides information on loading original documents.

33.1 Loading the Document3-2Original Documents Chapter 33.1 Loading the Document}ReferenceFor details, refer to “Feeding the Document” on page 2-41 of

3.1 Loading the Document33-3Original Documents Chapter 3❍ When loading documents of mixed page sizes, align the top edge and left side of the document

33.1 Loading the Document3-4Original Documents Chapter 34Press the [Start] key in the control panel.The pages of the document are fed in, start-ing wi

3.1 Loading the Document33-5Original Documents Chapter 3Placing the Document On the Original GlassThe following procedure describes how a document is

33.1 Loading the Document3-6Original Documents Chapter 32Observe the following precautions when loading the document onto the original glass.❍ Positio

ContentsvTo specify different vertical and horizontal scaling proportions (X/Y Zoom settings)...5-215.4 Selecting a Paper Set

3.1 Loading the Document33-7Original Documents Chapter 33If necessary, select an Original setting.For details on the Original setting, refer to “Selec

33.1 Loading the Document3-8Original Documents Chapter 35Press the [Start] key in the control panel.Scanning of the document begins.6Lift open the ori

3.1 Loading the Document33-9Original Documents Chapter 3✎Additional InformationWhen using a Copy setting where multiple docu-ment pages are to be scan

33.1 Loading the Document3-10Original Documents Chapter 3

Useful Operations Chapter 444UsefulOperationsThis chapter provides information on basic copy operations.

44.1 Basic Copying4-2Useful Operations Chapter 44.1 Basic Copying}ReferenceFor details, refer to “Making Basic Copies” on page xiv of the User’s Guide

4.1 Basic Copying44-3Useful Operations Chapter 42Specify the necessary copy settings.❍ To specify a Color setting, touch [Color]. For details, refer t

44.1 Basic Copying4-4Useful Operations Chapter 4❍ To specify the Original and Copy settings, touch [Orig Ö Copy]. For details, refer to “Selecting Ori

4.1 Basic Copying44-5Useful Operations Chapter 44Press the [Start] key in the control panel.

44.2 Stopping Copying4-6Useful Operations Chapter 44.2 Stopping CopyingTo stop a copy job➜ During a copy operation, press the [Stop] key in the contro

Contentsvi6.2 Setting the “Enlarge-Display Notice” Function ... 6-5To specify whether the confirmation messa

4.2 Stopping Copying44-7Useful Operations Chapter 4The copy operation stops, and the message “Job has been stopped. To resume job press the Start Key.

44.3 Queuing a Copy Job for the Multiple Bypass Tray4-8Useful Operations Chapter 44.3 Queuing a Copy Job for the Mul-tiple Bypass TrayIf the “Auto Pap

4.3 Queuing a Copy Job for the Multiple Bypass Tray44-9Useful Operations Chapter 42Touch [Bypass Reservation].3Touch [Paper Type].4Select the desired

44.3 Queuing a Copy Job for the Multiple Bypass Tray4-10Useful Operations Chapter 45Select the desired paper size, and then touch [Enter].The message

4.3 Queuing a Copy Job for the Multiple Bypass Tray44-11Useful Operations Chapter 47After the message “Place paper in the By-pass Tray.” appears, repl

44.4 Interrupting a Copy Job4-12Useful Operations Chapter 44.4 Interrupting a Copy Job}ReferenceFor details, refer to “Interrupting a Copy Job (In-ter

4.4 Interrupting a Copy Job44-13Useful Operations Chapter 42Press the [Interrupt] key in the control panel.The indicator on the [Interrupt] key lights

44.4 Interrupting a Copy Job4-14Useful Operations Chapter 44Press the [Start] key in the control panel.After the document is scanned, the job cur-rent

4.4 Interrupting a Copy Job44-15Useful Operations Chapter 4✎Additional InformationIf the [Interrupt] key is not pressed after the inter-rupting copy j

44.4 Interrupting a Copy Job4-16Useful Operations Chapter 4

Before Making Copies Chapter 111Before MakingCopiesThis chapter provides information that is important to know before mak-ing copies.

Specifying Copy Settings Chapter 555SpecifyingCopy SettingsThis chapter describes the proce-dures for specifying the various copy settings.

55.1 Selecting a Color Setting5-2Specifying Copy Settings Chapter 55.1 Selecting a Color Setting}ReferenceFor details, refer to “Selecting a Color Set

5.1 Selecting a Color Setting55-3Specifying Copy Settings Chapter 52Select the desired Color setting.The selected Color setting is applied.✎Additional

55.2 Selecting Output Settings5-4Specifying Copy Settings Chapter 55.2 Selecting Output Settings}ReferenceFor details, refer to “Selecting Output Sett

5.2 Selecting Output Settings55-5Specifying Copy Settings Chapter 5To specify Output settings1Touch [Basic], then [Output].2Select the desired Output

55.2 Selecting Output Settings5-6Specifying Copy Settings Chapter 5✎Additional InformationTo change the position of the punched holes or staples with

5.3 Specifying a Zoom Setting55-7Specifying Copy Settings Chapter 55.3 Specifying a Zoom Setting}ReferenceFor details, refer to “Specifying a Zoom Set

55.3 Specifying a Zoom Setting5-8Specifying Copy Settings Chapter 5To specify a Zoom setting1Touch [Basic], then [Zoom].2Select the desired Zoom setti

5.3 Specifying a Zoom Setting55-9Specifying Copy Settings Chapter 5✎Additional InformationIf [×1.0] was selected in step 2, copies of the same size as

55.3 Specifying a Zoom Setting5-10Specifying Copy Settings Chapter 5To specify a zoom ratio1Touch [Basic], then [Zoom].2Touch and to specify the desi

11.1 Explanation of Guide Conventions1-2Before Making Copies Chapter 11.1 Explanation of Guide Conven-tionsCAUTIONFailure to observe instructions high

5.3 Specifying a Zoom Setting55-11Specifying Copy Settings Chapter 5To select the “Auto Zoom” setting1Touch [Basic], then [Zoom].2Touch [Auto Zoom].

55.3 Specifying a Zoom Setting5-12Specifying Copy Settings Chapter 53Select the paper drawer loaded with paper of the desired copy size.The “Auto Zoom

5.3 Specifying a Zoom Setting55-13Specifying Copy Settings Chapter 5To specify a Reduce or Enlarge setting1Touch [Basic], then [Zoom].2Touch [Reduce]

55.3 Specifying a Zoom Setting5-14Specifying Copy Settings Chapter 53Select the desired zoom ratio, and then touch [Enter](As an example, the followin

5.3 Specifying a Zoom Setting55-15Specifying Copy Settings Chapter 5To specify a manual zoom ratio1Touch [Basic], then [Zoom].2Touch [Manual Zoom].

55.3 Specifying a Zoom Setting5-16Specifying Copy Settings Chapter 53Press the [C] (clear) key, and then use the keypad to type in the desired zoom ra

5.3 Specifying a Zoom Setting55-17Specifying Copy Settings Chapter 5To store a manual zoom ratio1Touch [Basic], then [Zoom].2Touch [Manual Zoom], and

55.3 Specifying a Zoom Setting5-18Specifying Copy Settings Chapter 53Press the [C] (clear) key, and then use the keypad to type in the desired zoom ra

5.3 Specifying a Zoom Setting55-19Specifying Copy Settings Chapter 5To recall a stored manual zoom ratio1Touch [Basic], then [Zoom].2Touch [Manual Zoo

55.3 Specifying a Zoom Setting5-20Specifying Copy Settings Chapter 54Touch [Enter].The stored zoom ratio is recalled.